Tools for Wheels

0192
In stock
+
16.27
Send me a proposal
The adapter can be rotated 360° and makes it easier to set up the brake bleeder device. Suitable for vehicle...
0195
In stock
+
13.21
Send me a proposal
The brake bleed adapter is compatible with Tesla Model 3. Works with CCLIFE brake pressure bleeder for the...
0196
In stock
+
15.79
Send me a proposal
The adapter can be rotated 360° and makes it easier to set up the brake bleeder device. Suitable for vehicle...
1015
In stock
+
13.29
Send me a proposal
Reset wind back brake pistons on changing brake pad Universal recording Incl. Pressure Plate Combo Adapter...
1018
In stock
+
19.58
Send me a proposal
Universal pressure tool for brake pistons without turning device for many cars and vans Extra heavy and stable...
1020
In stock
+
12.99
Send me a proposal
Universal tool for resetting the brake piston without turning device on brake calliper systems Actuated via...
1318
In stock
+
45.22
Send me a proposal
For the removal of bearings, inner rings and tightly fitting parts Contains: 1 x 165 mm pull rod; 4 x 130 mm...
1320
In stock
+
61.79
Send me a proposal
For the removal of bearings, inner rings and tightly fitting parts Contains: 1 x 165 mm pull rod; 4 x 130 mm...
1331
In stock
+
22.39
Send me a proposal
Forged tool Universal use For all vehicle types in the car sector for removing the ball pins when removing...
1336
In stock
+
13.19
Send me a proposal
For replacing tie rods, can be used for loosening and tightening Suitable for diameter of inner tie rod ball...
1338
In stock
+
45.57
Send me a proposal
Forged tool For all types of passenger vehicles for removing ball heads when dismantling ball joints. Ball...
1343
In stock
+
39.00
Send me a proposal
Aluminium pressure plate set; remover, inserter; drive tool; 9 pressure plates for workshop press. Ideal for...
1345
In stock
+
27.00
Send me a proposal
The pressure piece set is essential for bearing, bushing and seal ring work. 3 x driver sizes 110/140/160 mm...
1348
In stock
+
86.44
Send me a proposal
Suitable for the mounting of bearing shells, bushings, seals and rubbers. Made from special carbon steel,...
1351
In stock
+
71.40
Send me a proposal
Universal set for installing and removing wheel bearings. All sizes of pressure plates and puller bells are...
1352
In stock
+
71.40
Send me a proposal
Special tool for disassembly and assembly of wheel bearings when the steering knuckle is installed Compatible...
1356
In stock
+
130.90
Send me a proposal
Universal kit for mounting and disassembling bushings, bearings and seals 5 spindles M10 - M12 - M14 - M16 -...
1398
In stock
+
27.40
Send me a proposal
Professional Puller: The 5-piece ball joint puller set has 3 different sizes of forks and is ideal for removing...
1405
In stock
+
65.45
Send me a proposal
This 4-in-1 ball joint puller set is suitable for disassembly and assembly of ball and support joints. It also...
1422
In stock
+
30.45
Send me a proposal
Multi-purpose puller for gears with steering wheels, pulleys etc. Suitable for various light work, if...
1501
In stock
+
101.15
Send me a proposal
Universal use on most car wheel bearings, allows disassembly and assembly of the wheel hub and wheel bearings...
1601
In stock
+
130.90
Send me a proposal
Universal Spring Compressor Set with 3 Pairs of Jaws Suitable for McPherson Suspension Strut Systems. Maximum...
1602
In stock
+
130.90
Send me a proposal
Universal Spring Compressor Set with 3 Pairs of Jaws Suitable for McPherson Suspension Strut Systems. Maximum...
1603
In stock
+
95.20
Send me a proposal
The spring compressor must never be used with a pneumatic screwdriver. Risk of accident and injury This...
1604
In stock
+
54.74
Send me a proposal
High-quality spring compressor suitable for all coil springs / suspension springs. Universal spring compressor...
1605
In stock
+
33.51
Send me a proposal
Allows quick compression of the coil spring for replacing the shock absorber or spring. A wide spring contact...
1611
In stock
+
23.38
Send me a proposal
Clamping opening up to 370 mm, 4 locking rings per compressor for a secure hold. Spring flections enable quick...
1613
In stock
+
30.98
Send me a proposal
With the 280 mm span and 1.2T capacity, the spring compressor is ideal for cars, trucks, etc. Our heavy-duty...
1639
In stock
+
39.95
Send me a proposal
Allows you to quickly squeeze the coil spring to replace the shock absorber or spring. A wide spring contact...
2101
In stock
+
31.67
Send me a proposal
A multifunctional vacuum pump for testing, adjusting and bleeding automotive brakes. And is ideal for a variety...
2102
In stock
+
29.53
Send me a proposal
A multifunctional vacuum pump suitable for testing a variety of elementary vehicle settings and functions With...
2769
On backorder
+
74.80
Send me a proposal
Removal tool kit for professional removal of rim locks. Hexagonal drive, length 60 mm, made from 42 Cr-Mo...
2920
In stock
+
17.86
Send me a proposal
Working pressure: 6-12 bar Suction container: 0.75 L With 1.1 m silicone hose, wear-resistant,...
2924
In stock
+
24.92
Send me a proposal
Working pressure: 6-12 bar. Capacity of container for refilling: 0.75 litres. Capacity of suction...
3321
In stock
+
19.72
Send me a proposal
Our tyre changer is made of PA and 30% fibres, which are strong and durable. Will not scratch or damage the...
4010
In stock
+
12.79
Send me a proposal
The brake fluid tester is used to measure the water content in the brake fluid. Suitable for DOT: 3 - 4 - 5...
4799
In stock
+
23.70
Send me a proposal
Production of parts with different diameters: for copper and aluminium pipes from 5 to 16 mm (3/16 inch to 5/8...
8061
In stock
+
24.11
Send me a proposal
Universal ball joint extractor 18mm opening & 20mm opening For all vehicle types in the car sector for...
9200
In stock
+
38.51
Send me a proposal
Ideal for bleeding brakes and hydraulic clutch systems Easy to use without disassembling the wheels Keys...
9045
On backorder
+
68.66
Send me a proposal
Made of robust plastic, this brake bleeder is ideal for home use. It can hold a proud three litres of liquid and...
9049
In stock
+
19.89
Send me a proposal
Suitable for almost all standard vehicle types with floating and fixed callipers without built-in handbrake...
9044
In stock
+
54.74
Send me a proposal
Made from robust plastic, this brake bleeder is ideal for domestic use. Can hold 3 litres of liquid and can be...
 
Brand
Price
Dimensions